Titanium Plate
Titanium Alloy Has Excellent Corrosion Resistance, Small Density, High Strength, Toughness, And Weldability.
-
GR3 GR4 GR5 GR7 GR9 GR11 GR12 Tiantaium Alloy Plate
Samples for chemical analysis shall be representative of the material being tested. The utmost care must be used in sampling titanium for chemical analysis because of its great affinity for elements such as oxygen, nitrogen, and hydrogen.
Email Details
Therefore, in cutting samples for analysis, the operation shouldbe carried out insofar as possible in a dust-free atmosphere.
Chips should be collected from clean metal and tools should be clean and sharp. Samples for analysis should be stored insuitable containers -
Skull Titanium Plate
Ti-Ni alloy is a typical shape memory alloy material, which is an intermetallic compound with approximately equal atomic stroke. The density of Ti-Ni alloy is 6.45g/cm3, and its melting point is 1240-1310 ℃. There are two phases in crystal structure: martensite and austenite, which can be transformed into each other under certain conditions, showing shape memory effect and superelasticity in the process. Almost all interventional medical devices with nickel-titanium alloy are ingenious use of these two valuable properties.
Email Details
As a material for the preparation of interventional instruments, Ni-Ti alloy is mainly used in organisms, which must meet not only the reliability of mechanical properties, but also the reliability of chemistry, biology and biochemistry. and whether it is compatible with organisms and look at thrombosis, antigenicity and so on. -
Surgical Implantation Titanium Plate
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Email Details
Titanium plate is widely used in industry. The industrial manufacturing industry is the largest consumer of titanium bars. Titanium has become a top priority in industry because of its durability, light weight, corrosion and heat resistance and cost-effectiveness. A variety of titanium parts are used in industry. Titanium is used in oil extraction, power plants and mining processing plants. Titanium plates are very durable and lightweight, and titanium rods are used in many manufacturing processes. -
Titanium Plate Block
Titanium is an ideal structural material.It’s not very dense.Only 4.5g/m³,43% lighter than steel, it’s twice as strong as iron,almost 5 times higher than pure aluminum.Titanium has the performance of low density and high strength.The titanium rod occupies a very important position in the technology.At the same time, the titanium rod has strong corrosion resistance.
Email Details
Titanium has strong corrosion resistance in many media, especially in neutral and oxidizing media, and can also be used in some dilute reducing acids, such as nitric acid of various concentrations from room temperature to boiling point. -
Hot
Medical Dental Titanium Plate
Titanium has strong corrosion resistance in many media, especially in neutral and oxidizing media, and can also be used in some dilute reducing acids, such as nitric acid of various concentrations from room temperature to boiling point.
It has good corrosiveness to most alkali solutions, such as barium hydroxide, calcium hydroxide and magnesium hydroxide saturated solution at room temperature, but can not be used in boiling sodium hydroxide solution.
Titanium is not corroded at all in seawater, and it is also resistant to corrosion in most organic acids. It has excellent corrosion resistance in nitride solutions such as wet chlorine and hypochlorite. The corrosion resistance in sodium chloride solution increases with the increase of PH of the solution.medical dental titanium plate Gr5 titanium alloy sheet and plate for medical titanium plate for internal medicine implantationEmail Details -
ASTM B265 Titanium Plate
The GR5 titanium alloy plate has good thermoplasticity and can be used for various forms of seal, and the strength of the welded joint can reach 90% of the matrix metal strength, with good machinability, good corrosion resistance and good thermal stability. GR5 titanium alloy plate is one of the most widely used titanium alloys.
Email Details
Based on the high strength, the tensile strength of titanium products can reach 180kg/mm2. Titanium and titanium alloys in the aviation industry are known as "space metals". In addition, they are more and more widely used in shipbuilding, chemical industry, manufacturing mechanical parts, telecommunications equipment, cemented carbide and so on. In addition, titanium alloy can be used as artificial bone because of its good compatibility and memory function with human body. -
GR1 GR2 Titanium Plate
The GR5 titanium alloy plate has good thermoplasticity and can be used for various forms of Han Jie, and the strength of the welded joint can reach 90% of the matrix metal strength, with good machinability, good corrosion resistance and good thermal stability. GR5 titanium alloy plate is one of the most widely used titanium alloys.
Email Details
Based on the high strength, the tensile strength of titanium products can reach 180kg/mm2. Titanium and titanium alloys in the aviation industry are known as "space metals". In addition, they are more and more widely used in shipbuilding, chemical industry, manufacturing mechanical parts, telecommunications equipment, cemented carbide and so on. In addition, titanium alloy can be used as artificial bone because of its good compatibility and memory function with human body.